The SumoSprings kit part # TGMRC20 that fits your 2018 Ford E-450 will lift the rear of the RV about an inch so it would be the option you are looking for. view full answer...
I have a solution but there are no custom fit front mount hitches available for the 2020 Ford E-350 chassis. Instead the only option would be to use a universal receiver like item # 41990-16 and have a local fabrication shop fit it to the frame of your RV. view full answer...
The 2,800 lb capacity of the SumoSprings Solo Custom Helper Springs # SSR-130-54 is for both. This is the weight capacity at 50% compression. These are confirmed to fit your 2018 Ford E-Series Cutaway. view full answer...
The Thule RV Wheel Levelers # TH307617 have a 5,000lb weight capacity per leveler so you can rest assured that your using two for one side of your motorhome will be enough to have the 14,500lb GVWR of your Thor Class C Motorhome. view full answer...
I went to the warehouse to measure the distance from the top of the single bolt to the top of the double bolts on the frame plate of the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box # TLA7742 and found it is approximately 10-3/16 inches; you can compare that to the dimensions of the frame plate of the HiddenPower # TLA7740 currently on your 2017 Ford E-Series.
It is important to note that the HiddenPower # TLA7742 is not confirmed to fit your 2017 Ford E-Series so... view full answer...
The Roadmaster Rear Anti-Sway Bar # RM-1139-147 uses part # RM32VR (B315) for the end links, which are 11" in length. If you need longer end links Roadmaster can get you the correct size for your motorhome since you have a lift. view full answer...
The distance the Ultra Fab Skid Wheels # UF48-979012 will hang below the frame will be 6-7/16 inches. I do not recommend attaching them to the hitch. Doing so could actually compromise the structural integrity of the hitch and would likely void its warranty. The frame is the ideal location for wheels like these.
In general adding air bags will not increase the ride height of the vehicle. Sometimes they can by putting as much air in the bags as they can safely hold but then that will make... view full answer...
The distances of the mounting holes for the Curt Trailer Hitch Receiver # 14055 are 38-1/4" for the rearmost holes and then 38" for the forwardmost (towards the cab) holes. I have attached a dimensional photo for you to check out.
Please note that there are no trailer hitches that fit a 2017 Ford E-Series Cutaway so, like you stated, you will need to modify your frame and there is no guarantee that it is completely safe since you will be modifying your frame. view full answer...
The Draw-Tite Front Mount Trailer Hitch # 65053 is a great option for using a bike rack on the front of your 2018 Ford E-450. The distance from the center of the hitch pin hole to the forward-most part of the bumper is 2".
If you don't already have a bike rack, I recommend the Thule Doubletrack # TH92BJ. This bike rack can carry two bikes and folds up easily when not in use. For some bike frames you might need an adapter bar for use with the platform-style rack. The Swagman Deluxe Bike... view full answer...
The Buyers Products 9-1/2" Wheel Chock w/ Recessed Chain Eye - Black Rubber # 337WC6810L that you referenced is a 7 lb wheel chock that will do a great job on a boat ramp. If the ramp is really steep I would exercise caution still if the ramp is also wet at the time. view full answer...
It isn't out of the ordinary for the SumoSpring kits like the part # SSR-130-47 to make contact with just the weight of the vehicle on the suspension. This is more true for RVs where the weight on the chassis varies more with how it's configured. view full answer...
I checked with SumoSprings and they told me without the spacer the # SSR-130-54 is 5 inches tall and with the spacer is 6 inches tall. view full answer...
It sounds like you are looking for the Add-On Receiver for Blue Ox Adjustable 2" Drop Hitch Receiver item # BLU94TR. This will work with the Blue Ox Adjustable Drop Hitch Receiver Adapter item # BLU28XR you were looking at. view full answer...
The tongue weight capacity of your trailer hitch will be reduced by 50 percent if you put a bike rack in the MaxxTow hitch adapter part # MT70066 but not the overall trailer weight towing capacity. So your hitch would still have a 5,000 lb towing capacity but the tongue weight would go from 500 to 250 lbs. view full answer...
The weight capacity of the SumoSprings Maxim Custom Helper Springs # SSR-106-54-1 for your 2017 Ford E-450 is 7,000 lbs. Sometimes there are updates that will happen to these types of systems that change the weight rating and it seems that something like this happened from the time that video was made until now - an update has been sent to correct this.
Please note that while this will help support up to 7K, it will not increase the weight capacity of your vehicle to that much. This (and... view full answer...
I was able to go out to our warehouse to help you with the measurement for the latch on the Demco Channel Tongue Trailer Coupler - eZ-Latch - Zinc - 2" Ball - Bolt On - 10,000 lbs # DM13689-95. It is 7-1/4 inches from the top of the latch to the bottom of the coupler. I've attached a photo to assist. view full answer...